Webroot.com/safe - Enter Product Keycode - Download and Install

The Webroot installation file, wsainstall.exe will automatically download to your computer (if your download did not begin, click here). Locate the wsainstall.exe file on your desktop and double-click to start installation. When prompted, enter your Keycode. Continue to follow the instructions as they appear. Webroot For Mac; Webroot For Mac Download; Next, in the bottom right corner of your screen, or in your downloads folder, select the wsamac.dmg file. In the Safari dialog, click the Install button. To install SecureAnywhere: Click here to reach the Webroot SecureAnywhere installer for your Mac, and click the Download Now button to begin the. Download the SecureAnywhere installer to your Mac. Double-click wsamac.dmg to open the installer. Double-click the Applications folder to open it. In the Applications folder, double-click the Webroot SecureAnywhere icon to begin activation. Click here to reach SecureAnywhere installer for your Mac. In the bottom right corner of the screen, click Downloads and select wsamac. Double-click the Webroot SecureAnywhere icon. In the pop-up, click Open. In the Webroot SecureAnywhere pop-up, select your preferred language, and click Next. To install SecureAnywhere: Click here to reach the Webroot SecureAnywhere installer for your Mac, and click the Download Now button to begin the installation process. Next, in the bottom right corner of your screen, or in your downloads folder, select the wsamac.dmg file. Double-click the the Webroot SecureAnywhere icon to launch the installer.

Webroot.com/safe is an official website where you can register your Webroot product with a unique keycode. You can also download the Webroot security product with a single click after a successful registration. In short, you can visit webroot.com/safe from your web browser to download, install, and activate the Webroot antivirus on your device. You will require an email ID and Webroot product key.

How to Register Webroot Keycode Via webroot.com/safe

Following are the steps mentioned below to Register Webroot Keycode on Windows:

• Launch any Internet Browser from your device.
• Go to webroot.com/safe to register the code.
• Enter Your Email Account associated with your Webroot account.
• Enter your unique Webroot Keycode.
• Hit the Next option.
• Finally, your product key will be registered.

Following are the steps mentioned below to Register Webroot Keycode on Mac:

• From Your Computer Launch Safari Browser.
• Visit webroot.com/safe to register your product key.
• Then enter Your Email associated with your Webroot account.
• Enter Your 20 digits unique Webroot Keycode.
• Hit, Next option.
• Finally, your Webroot Keycode will be successfully registered.

How to Download Webroot Antivirus Via webroot.com/safe

• Open a web program on your device.
• After that, visit webroot.com/safe.
• Thereafter, provide your working email address and the Webroot keycode.
• Press Next option.
• Choose the Webroot security product among all alternatives.
• After that, select a membership plan of your choice.
• Finally, the file will be stored in the Download folder.

How to Install Webroot Antivirus on Your Device

Webroot will also send an email along with the installation instructions for reference. Below are the steps to install the Webroot antivirus on your device.

• After downloading the file, find it in the Download folder.
• Double-tap on the wsainstall.exe file.
• When you are asked, enter your Webroot keycode.
• After that, follow the on-screen directions on the Webroot security software.
• Finally, click the Finish option when the process is finished.

• Find the wsamac.dmg file.
• After that, tap on the file to open it.
• You will currently see the Webroot Internet Security symbol.
• After that, double-tap on the Webroot icon.
• Provide the Webroot key code whenever required.
• Follow the prompts as they show up on the window.
• Finally, provide your Mac password.

How to Activate Webroot Antivirus on your Device

Following are the steps mentioned below to enter keycode online:

• Go to webroot.com/safe.
• Then enter your Webroot keycode and email.
• After that, hit the submit button.
• Then click on the Download Now button.
• After the download is finished, install the set-up.
• Finally, your Webroot keycode will be successfully registered.

How to Renew Webroot Antivirus Subscription

Follow these steps to Renew Webroot antivirus on your device.

• Open Webroot Security application on your device.
• After that, wait for the Application to start.
• Click the Gear icon beside the My Account option.
• After that, click the Upgrade or Renew option in the application window.
• Finally, the Webroot website will appear on your web browser.
• Now, you can purchase any Webroot security product and also upgrade your Webroot software.

You can renew your Webroot antivirus by one more method. Follow the following instruction to do so:

• Open any web browser on your PC or laptop.
• Go to webroot.com/safe from your web browser.
• After that, click on the Renew or Upgrade option.
• Enter your Keycode inside the given box.
• Thereafter, press the Continue button.
• After that, enter your Billing Address and Payment options.
• Finally, click on the Buy Now option to renew or purchase the product.

You can set some additional permissions to deny or provide access to certain functions. To change the Access Control setting, open the Webroot application and click the Advanced setting option. After that, click on Access Control. You can change settings but do not forget to press the Save button to make changes on your device.

First of all, press the Windows and R buttons simultaneously. Type in 'appwiz.cpl.' and after that, press the enter button. After that, search for Webroot antivirus and right-click on it. Select the uninstall option. After that, enter the CAPTCHA. To install it back, visit the link webroot.com/safe.

Open the Webroot removal tool on your device. After that, right-click on the wrsa.exe file and run it as an administrator. Wait until it removes the Webroot application from your computer. Finally, restart your computer to remove all the files completely.

Deploying SecureAnywhere to Endpoints

You can deploy SecureAnywhere to endpoints using a variety of methods, depending on your business requirements and network size. An endpoint can be a Windows PC, laptop, server, or virtual server installed in your network. A list of endpoint system requirements is provided in Preparing for Setup.

Note: You can configure alerts so that administrators receive notification whenever new endpoints are installed. For more information, see Implementing Alerts.

To deploy SecureAnywhere to endpoints:

1. Find your keycode. If you don't know your keycode, click the Resources tab of the Management Portal.

   Note: Devices must use the Endpoint Protection keycode before they can report into the Management Portal. If there are endpoints in your network that already have SecureAnywhere installed with a different keycode, see Changing Endpoint Keycodes.

2. Select a method of deployment that best suits your environment.

   The following table describes methods of deployment.

   OPTION	DESCRIPTION
   Deploy the SecureAnywhere executable file	Deploy the SecureAnywhere installer file using one of these methods: Manually install the executable file on each endpoint. Send emails to end users, so they can install the software by clicking on the link provided in the email template. Rename the executable file using your keycode. The email template also provides a renamed executable file with the keycode. Use additional commands with the executable file to deploy it in the background. Use command-line options with the installer to deploy to endpoints that are behind a proxy server.
   Use MSI deployment options	Deploy the SecureAnywhere installer file using the Microsoft Installer (MSI).
   Use Windows Group Policy Object (GPO)	Deploy the SecureAnywhere installer file using Group Policy Object (GPO). You should have experience with Microsoft’s Active Directory and the GPO editor.

   Note: If you have a small network with less than 100 endpoints, we recommend that you use the simple deployment options described in the Resources tab. If you have a large network and use Active Directory, you should use the advanced deployment options. For large networks, you may also want to organize endpoints into separate consoles for simplified views into smaller groups. For more information, see Adding Consoles to Your Account.

3. Deploy SecureAnywhere to the endpoints, as described in one of these sections:
   • Using MSI for Deployment.

   Note: Check the Management Portal to make sure the endpoints have reported their status. For more information, see Viewing Endpoint Statuses.

4. Do either of the following:
   • Allow the system to assign endpoints to your default policy and default group. All endpoints are first assigned to your default policy and a default group. You can change those assignments later, if needed. For more information see Implementing Policies and Applying Policies to Endpoint Groups.
   • Assign endpoints to a specify group by selecting the group you want to add endpoints to, then from the Actions drop-down menu, select Deploy Endpoints to this Group.

   The system displays information required to install the software via the command link, and then adds the endpoint to the selected group.

5. When you're done, click the OK button.

Using the SecureAnywhere Installer

You can deploy the SecureAnywhere installer file using one of these methods:

• Install SecureAnywhere on each endpoint. Use this option if installing on a Mac.
• Send emails to end users, so they can install the software by clicking on the link provided in the email template.
• Rename the executable file using your keycode. This method is useful if you plan to use your own deployment tool and if you prefer not to use MSI commands to run the installation in the background.
• Use additional commands with the executable file to deploy it in the background.
• Use command-line options with the installer to deploy to endpoints that are behind a proxy server.

To use the SecureAnywhere installer for Windows:

1. On the endpoint, download the SecureAnywhere installer file.

   The installer file is available from the Resources tab or by clicking this link:

2. In the installation panel, enter the keycode.

   Your keycode displays in the Resources tab.

3. Optionally, you can click the Installation options button at the bottom of the installation panel and set these options:
   • Create a shortcut to SecureAnywhere on the desktop — This option places a shortcut icon on the Windows Desktop for SecureAnywhere.
   • Randomize the installed filename to bypass certain infections — This option changes the Webroot installation filename to a random name for example, “QrXC251G.exe”, which prevents malware from detecting and blocking Webroot’s installation file.
   • Protect the SecureAnywhere files, processes, and memory from modification — This option enables self protection and the CAPTCHA prompts. CAPTCHA requires you to read distorted text on the screen and enter the text in a field before performing any critical actions.
   • Change Language — To determine the language displayed in SecureAnywhere, click the Change Language button and select from the supported languages. You can only determine the displayed language during installation, not after.

4. Click the Agree and Install button.

   During installation, SecureAnywhere runs an immediate scan on the endpoint.

To use the SecureAnywhere installer for Mac:

1. On the endpoint, download the SecureAnywhere installer file.

   The installer file is available from the Resources tab or by clicking this link:

2. Download the SecureAnywhere installer to your Mac.
3. Double-click wsamac.dmg to open the installer.
4. Double-click the Applications folder to open it.
5. In the Applications folder, double-click the Webroot SecureAnywhere icon to begin activation.
6. In the first activation window, from the Language Selection drop-down menu, select a language and click the Next button.

   Note: Make sure you select the appropriate language. Once SecureAnywhere installs, you cannot change it.

7. In the next panel, enter your keycode and click the Activate button.

8. Follow any remaining on-screen prompts to complete the installation.

To send an email to end users so they can install SecureAnywhere themselves:

1. Click the Resources tab.
2. Click the Email template link.

   The email template displays in the How to get started window.

3. Cut and paste the text into an email message. The link adds the correct keycode for the user. Send the email to the users.

   The user clicks the link to begin installation. The program installs in the background, with the correct keycode already entered. When the process completes, a Webroot icon displays in the endpoint's system tray.

To run a background installation by renaming the executable file:

You can deploy SecureAnywhere by renaming the executable file with the keycode. This method is useful if you plan to use your own deployment tool and if you prefer not to use MSI commands to run the installation in the background. You can also use the email template, as described above, which is preconfigured to include a renamed installer file with your keycode.

Note: In User Account Control environments, the account used to run the installer must have local admin rights. You must run the installer from a process that has elevated privileges in UAC environments, to prevent the end user from seeing a UAC prompt.

1. On the endpoint, download the SecureAnywhere installer file:

2. Rename the installer file by replacing wsasme with your keycode.

   The resulting file name will have this format: XXXX-XXXX-XXXX-XXXX-XXXX.exe

3. Install the SecureAnywhere software on your endpoints, using your own deployment tool.

To run a background installation from a command line:

1. On the endpoint, download the SecureAnywhere installer file:

2. Run the installer from a command line, using any of the command options listed in the following table. More options are available; for more information, contact Webroot Business Support.

   Command Lines for Windows

   COMMAND LINE	DESCRIPTION
   /key=keycode	Installs with the provided keycode, with or without hyphens. For example: wsasme.exe /key=xxxx-xxxx-xxxx-xxxx-xxxx
   /silent	Installs in the background.
   /nostart	Installs without starting SecureAnywhere.
   /lockautouninstall=password	Allows automatic uninstallation of SecureAnywhere using the password you specify. This option is useful if you need to silently uninstall SecureAnywhere later. To uninstall, use the /autouninstall command. When you use /lockautouninstall, SecureAnywhere is not included in the Add/Remove Programs list in the Control Panel. Use the /exeshowaddremove command to include SecureAnywhere in Add/Remove Programs.
   /autouninstall=password	Corresponds to /lockautouninstall. Example: wsasme.exe/autouninstall=password By default, SecureAnywhere does not display in the Add/Remove Programs list in the Control Panel, which prevents the user from removing the software in unmanaged mode.
   -clone	For cloned machines/VMs use this to have the agent create a persistent, unique value on the PC which will change what is displayed in the portal for the machine IDs and the hostname of the PC. The product log will indicate this flag being present for the administrator to be aware of which PC they're looking at, for example 'Applied unique machine ID: C8137921' where C8137921 matches the hostname, for example, PCHOSTNAME-C8137921, as well as the first 8 bytes of both the InstanceMID and DeviceMID to allow each of them to be identifiable and different than the original IDs. This value will persist if the agent is uninstalled/reinstalled so that existing agents won't move to other IDs. If the OS is reinstalled, the ID will change. Example: wsasme.exe /key=xxxx-xxxx-xxxx-xxxx-xxxx /silent -clone Note: For use when InstanceMID's are matching causing duplicates in the console or endpoints replacing endpoints at each poll interval.
   /exeshowaddremove	Includes SecureAnywhere in the Control Panel Add/Remove Programs list. Example: wsasme.exe /key=xxxx-xxxx-xxxx-xxxx /lockautouninstall=password/exeshowaddremove Note: Adding SecureAnywhere to Add/Remove Programs enables the endpoint user to remove the software in unmanaged mode.
   /group=groupcode	Command line switch for deploying directly into groups. Example: wsasme.exe /key=xxxxxxxxx /group=-135260017840748808 /silent Assign endpoints to a specific group by selecting the group you want to add endpoints to, then from the Actions drop-down menu, select Deploy Endpoints to this Group. Note the GROUPCODE. Other requirements: The group must already exist in the console. This only works new for new installs on systems that have never been seen by the console previously. Example for command line: msiexec /i 'C:wsasme.msi' GUILIC='XXXX-XXXX-XXXX-XXXX' CMDLINE='SME,quiet,Group=-135260017840748808' /qn /l*v %windir%wsa_install_log.txt For MSI installs you can use command line and an MSI editor. Example for MSI Editor in CMDLINE field: Group=-135260017840748808
   -proxyhost=X -proxyport=X -proxyuser=X -proxypass=X -proxyauth=#	Specifies proxy settings. Note: If the endpoint connects through a proxy server, SecureAnywhere will automatically detect the proxy settings. SecureAnywhere checks for changes to the proxy settings every 15 minutes and when the endpoint restarts. We recommend using auto-detection for proxy settings; however, you can use command-line options if you prefer. To enable proxy support, use these command-line options: wsasme.exe -proxyhost=nn.nn.nn.nn -proxyauth=n (where n can be 0=Any, 1=Basic, 2=Digest, 3=Negotiate, 4=NTLM) -proxyuser=proxyuser -proxypass=password -proxyport=port_number We recommend that you use a specific value for-proxyauth, instead of 0 (any). The any option requires the endpoint to search through all authentication types, which might result in unnecessary errors on proxy servers as well as delayed communications. If you use this command-line option, use all parameters and blank out any value you don't need with double quotes, for example: proxypass='
   /lang=LanguageCode	Specifies the language to use for the product, rather than allow default language detection. Codes include: en — English ja — Japanese es — Spanish fr — French de — German it — Italian nl — Dutch ko — Korean zh-cn — Simplified Chinese pt — Brazilian Portuguese ru — Russian tr — Turkish zh-tw — Traditional Chinese Example: wsasme.exe /key=xxxxxxxxxxxx /silent /lang=ru

   Command Lines for Mac

   COMMAND LINE	DESCRIPTION
   -silent	Installation will be silent. sudo '/Applications/Webroot SecureAnywhere.app/Contents/MacOS/Webroot SecureAnywhere' install -keycode=<keycode> -silent
   -proxy_auth= -proxy_host= -proxy_port= -proxy_user= -proxy_pass=	Designates proxy install arguments including authentication method, host, port, user and password. auth_any_0 auth_basic_1 auth_digest_2 auth_negociate_3 auth_ntlm_4 open '/Applications/Webroot SecureAnywhere.app' --args install -keycode=<keycode> -proxy_auth=auth_any_0 -proxy_host=<host> -proxy_port=<port> -proxy_user=<user> -proxy_pass=<password>
   -keycode=	Installation will not prompt for keycode. open '/Applications/Webroot SecureAnywhere.app' --args install -keycode=<keycode>
   -language=	Installs with designated language. open '/Applications/Webroot SecureAnywhere.app' --args install -language=en Note: Complete list of languages TBD.
   Full String	sudo '/Applications/Webroot SecureAnywhere.app/Contents/MacOS/Webroot SecureAnywhere' install -keycode=XXXX-XXXX-XXXX-XXXX-XXXX -language=en –silent -proxy_auth=auth_basic_1 -proxy_host=proxy.proxy.com -proxy_port=8080 -proxy_user=proxyuser.com -proxy_pass=proxypass

Using MSI for Deployment

The Microsoft Installer (MSI) requires commands during installation, which apply the keycode and options that activate Endpoint Protection installation mode. The MSI installer is interactive by default, and requires the msiexec.exe option /qn to run an automated installation in the background.

This is an example of an MSI command:

msiexec /i wsasme.msi GUILIC=licensekey CMDLINE=SME,quiet /qn /l*v install.log

Note: In User Account Control environments, the account used to run the installer must have local admin rights. You must run the installer from a process that has elevated privileges in UAC environments, to prevent the endpoint user from seeing a UAC prompt.

To remove SecureAnywhere later:

To remove the SecureAnywhere software from the endpoint later, use the standard MSI command:

msiexec /x wsasme.msi /qn /L*v uninstall.log

To use an MSI editor:

If you use your own methods to deploy the SecureAnywhere software on endpoints, see the following table for commands you can pass to msiexec.exe during installation.

You can also modify these commands directly, using an MSI editor such as ORCA:

• Set the CMDLINE property in the Property table to the appropriate value.
• Set the GUILIC property in the Property table to your keycode.
• Set the ARPNOREMOVE property in the Property table to the appropriate value.

Using GPO for Deployment

To install SecureAnywhere using GPO, you should have experience with Microsoft’s Active Directory and the GPO editor.

You can also watch a video on how to use GPO at How to Deploy Using Group Policy - SecureAnywhere Business.

To install SecureAnywhere using GPO:

1. From the following location, download the SecureAnywhere MSI installer to a network share:

   Downloading the file makes it accessible to all endpoints on which you will deploy SecureAnywhere.

2. Go to the server that is the domain controller for the deployment group.
3. Open the GPO editor on the domain controller and create a policy for the deployment group.
4. Assign SecureAnywhere to all endpoints that belong to the Organizational Unit where the Group Policy is created.

   SecureAnywhere installs on the endpoints in the group when they restart.

Installer Options

The WSA agent comes in two installer formats, EXE and MSI, both of which are located under the Resources tab in your WSA console.

• EXE — The EXE file format can be downloaded and installed either using the generic EXE file, wsasme.exe, or by using the Windows Download link, which is the EXE file, renamed using your WSA keycode, which when run, imbeds the keycode into the installation process, and runs as a silent and unattended installation.
• MSI — The MSI format can be downloaded utilizing the wsasme.msi link under the Install using MSI section. The MSI can be edited to customize the installation including the keycode in the GUILIC property and Command-Line options in the CMDLINE property and be deployed using GPO.

Download Webroot For Mac

Installing on Terminal (RDS) Servers and Citrix XenApp

When installed on a Terminal server (RDS server) or Citrix XenApp for desktop/session brokering or hosted shared desktops, the WSA agent protects the environment by sharing its kernel module across sessions and provides a user process for each. The Webroot Management console displays the hosting server and each session as a combined single entry or device for reporting and management. The WSA agent does not support being streamed via application visualization.

Installing on Duplicated Images or VMs

When Webroot SecureAnywhere Business Endpoint protection is installed a ‘machine ID’ is generated from various hardware and software data points including Hostname, SID and MAC address. If endpoint images are re-used without ‘sys prepping’ them, or in virtual environments where VMs are copied or provisioned from a master image and not sys prepped as part of their deployment or provisioning, the endpoints will report into the console using the same ‘machine ID’ and compete for the same position or potentially generate duplicates in the Webroot management console.

If this occurs in your Webroot management console, please uninstall Webroot SecureAnywhere Business Endpoint Protection from the affected endpoints Be sure to remove or rename the folder “WRDATA” located in %PROGRAMDATA% to ensure no configuration files remain, then, reinstall it with the “uniquedevice” command line option

For example:

Executable Method

“wsasme.exe /key=xxxx-xxxx-xxxx-xxxx-xxxx /silent –uniquedevice”

MSI Method

This will cause SecureAnywhere to create a unique identification for that system by taking a checksum of the hostname and modifying the ‘machine ID’ with it. This is useful if the machines OS or hardware are cloned but the hostnames are always different. In this case, the unique hostname will allow there to be unique instances of devices for reporting into the Webroot management console. The hostname remains untouched so it will be reported into the console exactly as it exists within the OS.

Download Webroot Secureanywhere Mac

For this reason it is not recommended to install Webroot SecureAnywhere Business Endpoint protection within an image that will be copied or used for provisioning without first being sys prepped. In most virtual environments Webroot SecureAnywhere Business Endpoint protection should be installed after the VM has been deployed using Group policy or logon script, etc including non-persistent VM environments.

If hostnames are not unique within the deployment the “clone” install switch should be used. For example:

Executable Method

“wsasme.exe /key=xxxx-xxxx-xxxx-xxxx-xxxx /silent –clone”

MSI Method

Webroot Mac Download

This creates a registry key stored in: HKLMSystemCurrentControlSetControlCloneTimeStampFlags

Use this to have the agent create a persistent, unique value on the PC which will change what is displayed in the portal for the machine IDs and the hostname of the PC.

The scan log will indicate this flag being present for the administrator to be aware of which PC they're looking at, for example:

'Applied unique machine ID: C8137921'

where C8137921 matches the hostname reported in the Webroot management console, for example, PCHOSTNAME-C8137921. This value will persist if the agent is uninstalled/reinstalled so that existing agents won't move to other IDs. If the OS is reinstalled, the ID will change.

For more information on how to deploy within a Citrix environment specifically, please see this document: